Podcast intro music you make yourself, at Apple's −16 LUFS
We asked Claude Code for an intro, a bed for the host's voice and an outro sting for an example podcast, made in Instant DJ. Both came out at −16 LUFS, the level Apple Podcasts asks for, with true peaks under −1 dB. What it did, the numbers, and what to check.
A podcast intro has three jobs: a few seconds that say “this show is starting”, a theme people come to recognise, and a quieter stretch the host can talk over. Most shows also want a short sting for the end. All of it has to sit at the episode’s loudness: Apple Podcasts asks for −16 LKFS within 1 dB, with true peaks no higher than −1 dBFS (Apple Podcasts for Creators).
We asked Claude Code, connected to Instant DJ, for all of it, for an example show.
The request
One request, with Instant DJ’s tools allowed:
In Instant DJ’s Studio, make me podcast intro music for a weekly tech interview show called “Signal Path”. I need two new songs: “Signal Path Intro”, about 20 seconds, with a short opening, the theme, and a quieter last few bars with no lead that can sit under my voice; and “Signal Path Outro”, a 5 to 6 second sting to end the episode. Warm and modern, not too busy, around 100 BPM. Render, analyse and fix what the analysis flags. Master both to −16 LUFS with the ceiling at −1.5 dB, and export each as a WAV. Don’t open, change or delete any of my other songs, and don’t play anything through the speakers. At the end, tell me what you changed after the analysis, and the final numbers for each.
What Claude Code did
It took about three and three-quarter minutes and 38 calls to Instant DJ:
- Read the Studio guide and listed the songs. Another song was open, so before starting a new one it checked whether that song had unsaved changes.
- Wrote the intro: 8 bars at 100 BPM in F major, 19.2 seconds, with Rhodes chords, a warm pad, a soft bass, a lo-fi drum kit and a plucked lead. Bar 1 is the opening, the Rhodes alone with a swell. Bars 2 to 5 are the theme, the lead over the band. Bars 6 to 8 are the bed: no lead, lighter drums and held chords, from 0:12.
- Analysed it. The analysis said “nothing stands out in the numbers — listen”, but Claude Code read the numbers itself and found three problems. The bed was only 3 LU quieter than the theme, too loud to talk over. The hats in the bed measured −42.8 LUFS, too quiet to hear. And the mix was dark, heavy in the low mids and light at the top.
- Fixed them: the Rhodes down 4 dB and the bass down 3 dB in the bed; the hats in the bed brought up; the Rhodes cut 3 dB at 300 Hz, lifted 3 dB at the top and opened up; the hats and snare up 2 dB, with a soft clipper on them; and the last chord shortened so the ring-out ends near 20 seconds. The bed now sits about 6 LU under the theme.
- Mastered the intro to −16 LUFS and exported it.
- Wrote the outro: 2 bars, 4.8 seconds, the theme’s opening phrase landing on the home chord. This time the analysis flagged something: −14.2 LUFS, louder than the −16 target. Mastering took it down 2 dB, and it exported that too.
The numbers
Measured on the exported WAVs with our LUFS meter:
| Intro | Outro | |
|---|---|---|
| Integrated loudness | −16.0 LUFS | −16.0 LUFS |
| True peak | −1.9 dBTP | −3.8 dBTP |
| Music | 19.2 s | 4.8 s |
| Sound ends at | 20.6 s | 6.2 s |
| File length | 27.2 s | 12.8 s |
Inside the intro, the opening measures −19.1 LUFS, the theme −14.2 and the bed −20.0. Both files are within Apple’s −16 ±1 and under its −1 dB true-peak limit; the limiter never had to work, since neither reached the −1.5 dB ceiling.
What to check before you use it
- Trim the end. Each WAV runs on for about eight seconds after the last bar, which leaves room for effects to ring out. Here the sound stopped about a second after the music and the rest was silence: cut the intro at about 21 seconds and the outro at about 6.
- Measure the whole episode. Apple’s −16 is for the episode, not the music on its own. Once the intro sits under your voice, put the finished file through the LUFS meter.
- Listen. Claude Code said it plainly: everything was measured, nothing was heard. Start talking as the bed comes in at 0:12 and hear whether your voice sits clear of it.
What you need
- Instant DJ 1.6 or later on a Mac with Apple silicon, macOS 14 or later: free for 7 days with every feature, then one in-app purchase, US$9.99 during the launch sale, with no subscription.
- Claude Code, or any other MCP client, connected as on Instant DJ’s MCP page, with its own plan.
For music under a video instead, see music for a product demo video, timed to its cuts.
Questions, answered
- How loud should podcast intro music be?
- Apple Podcasts asks for −16 LKFS (the same scale as LUFS), within 1 dB, with true peaks no higher than −1 dBFS. That's for the whole episode, so master the music close to it and then measure the finished episode, voice and music together.
- Can I use music I make in Instant DJ as my podcast intro?
- The music is built from Instant DJ's own instruments and kits, so there's no stock-music licence to buy for them. Samples you add yourself keep their own terms, and copying a known melody can still infringe.
- Why is the exported file longer than the music?
- Instant DJ's WAV runs on for about eight seconds after the last bar, which leaves room for reverb and echo to ring out. In our files the sound ended about a second after the music and the rest was silence. Trim it in your editor or podcast app.
- Do I need to know music to do this?
- No. Describe the show and the feel you want; the assistant writes the parts and Instant DJ renders, measures and masters them. Your ears decide whether it fits.